A Guide To Help You Check The Quality Of Your Home Plumbing | ZIM NEWS

The plumbing of a house is one of the most essential elements. A home’s plumbing makes up about fifteen percent of the home’s value, hence its importance.

Unfortunately, many homeowners know very little about the plumbing in their home and who can blame them. They all have work to do to ensure that the plumbing is properly maintained.

However, any homeowner can benefit from knowing a little about their home’s plumbing. A plumbing inspection is a systematic process of checking the vital elements of a home’s plumbing system. A plumbing system is crucial to ensuring that your plumbing system works smoothly.

The following is a guide to help you monitor the quality of your plumbing at home:

1.Close the main water supply

The first thing to do before doing a plumbing inspection on your home is to shut off the water supply. This may interest you : Obituary – Nicholas Poli – Portland Press Herald. If you don’t, your assessment will not be complete and you will not know exactly what the quality of the plumbing in your home is.

You need to go to the main water valve and turn it counterclockwise to close it. Start the inspection by checking the main water valve for any defect or defect. You should also check if there is a water leak at the main valve.

Another thing to check is if the meter stops when you close the cover. If the meter continues to read after you close the valve, there is a problem with the system.

On the same subject :
COVID-19 and busy contractors caused unexpected delays, but Beaverton Tavern owner Robin…

2.Check the water pressure

If you are sure that the main valve is working correctly, you should check other elements of the piping system. See the article : OCTC to offer Plumbing FastTrack program | Community | messenger-inquirer.com – messenger-inquirer. One thing you should do is the pressure test water pipe.

Turn on your water to check the pressure of the water flowing through the pipes. You should vary the water pressure between 75 and 100 PSI to test normal working pressure.

If you don’t know how to check the water pressure or don’t have the tools, you should call a local plumber to do it – All service plumbers in Southern California can help you with a water pressure test if you live in the area. They can also check other aspects of your plumbing.

Water pressure determines the level of water flow in your plumbing, hence its importance. A lack of water pressure is a sign of problems with the system.

See the article :
Community Do you have problems with the sewerage system in your home…

3.Check sewer and drain lines

Another crucial facet of your plumbing system is the drain. If you have good drainage, your plumbing system will likely function correctly and vice versa. On the same subject : Taranaki company contracted for airport demolition fined $105,000 for illegal disposal of materials. Check the drainage systems to see if there is pipe corrosion, damage or blockage. Many factors can affect your drainage system.

You must have access to your home’s sewage system from your property to the curb connection. Check the septic tank to see if it needs to be emptied because if it is full there will be flow back in your plumbing system.

See the article :
Merchant of builders Travis Perkins sold its plumbing and heating distribution business…

4.Check the sanitation

The main valve is the main control point for your water supply and plumbing system. However, all fixtures in the system have valves to control the water supply. You should check these fixtures individually and make sure they: properly functioning to affect the whole system.

Check one of the water supply lines and make sure that water and waste can flow freely through it. Evaluate the internal and external areas of the property to see if there are any signs of water damage.

Check the gutters, water hoses, and any drains on your property to identify any blockages that are adversely affecting the plumbing system.

5.Looking for Leaks

Leaks are a sign of problems with your plumbing system; therefore, you should regularly check for water leaks. Take the time to go around your property and check as many places as possible for any water leaks.

It is best to start with the basement and the attic as these are the places with an unknown leak. Especially if you have a central heating boiler or a heated water tank in the basement or attic.

Go to other rooms in your house and check each room adequately for leaks, although it is easy to notice a water leak in the living room.

The places where you use the plumbing and water usually have leaks that most homeowners ignore. Therefore, check the bathroom, toilets and kitchen for any leaks. If there are any leaks, address them immediately.

You should always complete a full plumbing checklist before buying or renting a property. It ensures that you pay the right price and prevents serious problems in the future. The above is a comprehensive guide that will help you assess the quality of your home’s plumbing and maintain it in the future.

Comments are closed.